Linksys Range Extender Setup

Linksys WiFi Extenders help you access high-speed internet everywhere in the home or office – even in dead zones. In order to enjoy trouble-free WiFi access for your smart devices, there is a need to configure Linksys Extender properly. Most of the extenders and routers come with a setup CD which makes Linksys Range Extender Setup process very easy.

Range Extenders are intended to work as bridge or replicator which turns weak WiFi signals into amplified ones. All Linksys Extenders work on the same technology – they receive the signals from existing router and then boost them to cover all the areas in house or workplace. Just complete Linksys Range Extender Setup and start live streaming, web browsing, online banking, online shopping and much more without any buffering.

Unable to connect to Linksys Extender

  • Linksys Extender Setup
    Check the extender position

    In order to connect to Linksys Extender, the position of extender should be optimal. While going through Linksys Range Extender Setup Instructions, the extender should be placed too far away from concrete walls, metal objects and electronic appliances like electric iron, refrigerator, microwave ovens etc.

  • Linksys Range Extender
    Access fast internet connection is the default Linksys Extender Login page. But it shows errors that you are not connected to range extender. To resolve this problem, make sure that the computer is connected to high-speed internet connection. Don’t use neighbors’ WiFi network or public wireless connection while accessing extender.linksys.

  • linksys extender
    Connect extender to a network

    If you are still unable to connect to Linksys Extender, use an Ethernet cable to connect the extender. You can also make a wireless connection between the extender and network. In case this doesn’t get your issue resolved, make sure to contact our skilled technicians at 1-844-726-2726 to fetch instant solutions.

Linksys WiFi Range Extender Configuration

Most of the extenders include LED lights which provide you the information about WiFi Setup and Power. In case the LED is blinking in white color then it means that power is on. On the other hand, this LED also indicates the upgradation of Linksys Extender Firmware or factory settings.

Solid white color of LED light shows that you are ready to use the wireless range extender. If it blinks with some different color (except white), it means there is any issue with network setup. To get this issue resolved, connect with our technical experts at our toll-free number 1-844-726-2726. Our professionals aim to fix the issue permanently in a few moments.

Tips to access webpage

For Linksys Extenders, the default web address is which is used to install the device. Have a look at the following steps for Linksys Extender Installation.

  • Plug the extender into a wall socket.
  • If Linksys Range Extender has antennas, then connect them using the given power cable.
  • Make sure to keep the antennas in straight position to achieve the best signal strength.
  • Also, do not mess the power cable of extender with other wires.
  • Put the extender to a nice, clean and airy place.
  • Check the LED lights on the extender.
  • Connect the computer with a reliable network connection.
  • Open a browser and go to web address.
  • It will open Linksys Extender Setup page.
  • If the page doesn’t open, use Linksys Range Extender IP Address for login.

After following the above-mentioned steps carefully, you can easily access Linksys Range Extender Login page. Enter the username and password and start Linksys Extender Setup.

Linksys Extender Setup using WPS Setup

If you don’t want to go through the manual configuration and are looking for the simplest way for Linksys Extender Setup, opt for WPS method. You can use WiFi Protected Setup (WPS) for setting up Linksys Wireless Range Extender. With this method, connecting the extender to a WiFi network has actually become a piece of cake. This method even lets you connect other smart devices like computer, laptop, smartphone or tablet. Here are the steps to follow for Linksys WiFi Extender Setup:

  • Power on the extender and computer.
  • Open wireless setup page on an internet browser.
  • Click on WPS button.
  • A pop-up window will appear on the screen.
  • When LED becomes solid, it means the connectivity has been done.
linksys extender setup

That’s it. How easy it is to set up Linksys Extender with WPS, isn’t it? But at any step if you face any type of issue, feel free to talk to our highly-experienced experts at 1-844-726-2726. They will reach out to you with simple yet targeted solutions.

How to factory reset Linksys Extender

Before getting started with the process of Linksys Extender Setup using or WPS setup, the extender must be in factory default settings. Apart from this, if there is any issue while setting up the extender or after the setup, resetting can help you resolve all issues with Linksys Extender like intermittent wireless connections, unable to access the setup page, LED is not blinking, issues with extender setup and much more. Just follow the steps below to factory reset Linksys Extender and get rid of all extender-related issues:

  • Power on the range extender.
  • Connect the computer to an internet connection.
  • Launch a web browser and go to web address.
  • On computer, click on network button.
  • Access device webpage on the computer.
  • A new window will open known as Linksys WiFi Extender Login.
  • Enter username and password.
  • Once the web-based setup page appears, select factory settings option.

reset linksys extender to factory settings

Wait for a few minutes and restore the factory settings to complete the configuration process. Unplug Linksys Range Extender and turn it on again after some time. In case you stuck at any point during the process to reset Linksys Range Extender to factory settings, give us a call on 1-844-726-2726 and resolve all your technical issues. Our expert technicians are just a phone call away.